Right the frame is straight and finished. now time for paint. My thoughts as a sketch:


so first i set up the shed for spraying. Patio heaters on full blast are only getting the temp to 16 Degrees. So I opt for a 2k primer which sets chemically so is less sensitive to the normally 20 degree heat required. 20160304_185035.jpg

Next is the white.


Then masking and a light blue and then a dark blue metallic.


Then we need decals and a top coat. Also a 2k but this one is in cans and my compressor decided to pack up. The end result:

frame 2.jpg